Index: DamClients/DamUI/trunk/doc/Differences with previous release.txt
===================================================================
diff -u -r1521 -r1526
--- DamClients/DamUI/trunk/doc/Differences with previous release.txt	(.../Differences with previous release.txt)	(revision 1521)
+++ DamClients/DamUI/trunk/doc/Differences with previous release.txt	(.../Differences with previous release.txt)	(revision 1526)
@@ -33,6 +33,10 @@
 MWDAM-1223
 When design was made for piping calculations in combination with DTH adaption the Sf piping was set to '1' if crest was adapted to DTH. Now real safety factor is calculated.
 
+MWDAM-1225
+Message The surfaceline points are not ascending (x-values) for same project no message in DAM 15.1
+Surfaceline validator in DAM 15.1 was not correct and accepted vertical lines in surfacelines. Vertical lines has to be avoided in D-Geo Stability due to possible failing calculations.
+
 MWDAM-1227
 As with MWDAM-1219 the real problem is the correct determination of the Location With Lowest UpliftFactor. Old DAM uses (wrongly) global surface line whereas the engine uses the correct localised surface line. The effect here is a different value for xCoordinateLastUpliftPoint which is passed on to the DGSMStabDam.dll which determines the grid.