// Copyright (C) Stichting Deltares 2017. All rights reserved.
//
// This file is part of the Dam Engine.
//
// The Dam Engine is free software: you can redistribute it and/or modify
// it under the terms of the GNU Affero General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// 
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Affero General Public License for more details.
//
// You should have received a copy of the GNU Affero General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
//
// All names, logos, and references to "Deltares" are registered trademarks of
// Stichting Deltares and remain full property of Stichting Deltares at all times.
// All rights reserved.

using System;
using System.Collections.Generic;
using Deltares.DamEngine.Data.Design;
using Deltares.DamEngine.Data.General;
using Deltares.DamEngine.Data.Geometry;
using Deltares.DamEngine.Data.Geotechnics;
using Deltares.DamEngine.Io;
using Deltares.DamEngine.Io.XmlInput;
using KellermanSoftware.CompareNetObjects;
using NUnit.Framework;
using Soil = Deltares.DamEngine.Data.Geotechnics.Soil;
using SoilProfile1D = Deltares.DamEngine.Data.Geotechnics.SoilProfile1D;
using SoilProfile2D = Deltares.DamEngine.Data.Geotechnics.SoilProfile2D;

namespace Deltares.DamEngine.Interface.Tests
{
    [TestFixture]
    public class FillDamFromXmlInputTests
    {
        [Test]
        public void CanWriteAndReadDamProjectDataToXml()
        {
            const string inputFilename = "InputFile.xml";
            DamProjectData expectedDamProjectData = CreateExampleDamProjectData();
            Input input = FillXmlInputFromDam.CreateInput(expectedDamProjectData);
            DamXmlSerialization.SaveInputAsXmlFile(inputFilename, input);
            input = DamXmlSerialization.LoadInputFromXmlFile(inputFilename);
            DamProjectData actualDamProjectData = FillDamFromXmlInput.CreateDamProjectData(input);
            CompareDamProjectData(actualDamProjectData, expectedDamProjectData);
        }

        [Test]
        public void CanWriteAndReadDamProjectDataToXmlString()
        {
            string xmlString;
            DamProjectData expectedDamProjectData = CreateExampleDamProjectData();
            Input input = FillXmlInputFromDam.CreateInput(expectedDamProjectData);
            xmlString = DamXmlSerialization.SaveInputAsXmlString(input);
            input = DamXmlSerialization.LoadInputFromXmlString(xmlString);
            DamProjectData actualDamProjectData = FillDamFromXmlInput.CreateDamProjectData(input);
            CompareDamProjectData(actualDamProjectData, expectedDamProjectData);
        }

        private void AddPointToSurfaceLine(SurfaceLine2 surfaceLine, double xCoordinate, double zCoordinate, CharacteristicPointType characteristicPointType)
        {
            var geometryPoint = new GeometryPoint()
            {
                X = xCoordinate,
                Y = 0.0,
                Z = zCoordinate,
            };
            surfaceLine.AddCharacteristicPoint(geometryPoint, characteristicPointType);
        }
        private DamProjectData CreateExampleDamProjectData()
        {
            var damProjectData = new DamProjectData();
            damProjectData.DamProjectType = DamProjectType.Design;
            damProjectData.Dike = new Dike();
            Dike dike = damProjectData.Dike;
            FillSurfaceLines(dike);
            FillSoils(dike);
            FillLocations(dike);
            FillSoilProfiles1D(dike);
            FillSoilProfiles2D(dike);
            return damProjectData;
        }

        private void FillSoils(Dike dike)
        {
            const int soilCount = 3;
            dike.SoilList = new SoilList();
            for (int i = 0; i < soilCount; i++)
            {
                Soil soil = new Soil() {Name = String.Format("Soil {0}", i)};
                //soil.SoilType = SoilType.Loam;

                //soil.AbovePhreaticLevel = 10 + 0.1 * i;
                //soil.BelowPhreaticLevel = 10 + 0.1 * i;
                //soil.DryUnitWeight = 10 + 0.1 * i;

                //soil.ShearStrengthModel = ShearStrengthModel.CuMeasured;

                //soil.Cohesion = 10 + 0.1 * i;
                //soil.CuBottom = 11 + 0.1 * i;
                //soil.CuTop = 12 + 0.1 * i;
                //soil.DilatancyType = DilatancyType.Zero;
                //soil.FrictionAngle = 13 + 0.1 * i;
                //soil.Ocr = 14 + 0.1 * i;
                //soil.PoP = 15 + 0.1 * i;
                //soil.RatioCuPc = 16 + 0.1 * i;
                //soil.StrengthIncreaseExponent = 17 + 0.1 * i;
                //soil.UsePop = true;

                soil.BeddingAngle = 18 + 0.1 * i;
                soil.DiameterD70 = 19 + 0.1 * i;
                soil.DiameterD90 = 20 + 0.1 * i;
                soil.PermeabKx = 21 + 0.1 * i;
                soil.WhitesConstant = 22 + 0.1 * i;

                dike.SoilList.Add(soil);
            }
        }

        private void FillSurfaceLines(Dike dike)
        {
            const int surfaceLineCount = 3;
            for (int i = 0; i < surfaceLineCount; i++)
            {
                var surfaceLine = new SurfaceLine2();
                surfaceLine.Name = String.Format("SurfaceLine {0}", i);
                surfaceLine.CharacteristicPoints.Geometry = surfaceLine.Geometry;
                AddPointsToSurfaceLines(surfaceLine);
                dike.SurfaceLines2.Add(surfaceLine);
            }
        }

        private void AddPointsToSurfaceLines(SurfaceLine2 surfaceLine)
        {
            AddPointToSurfaceLine(surfaceLine, 0.0, 0.0, CharacteristicPointType.SurfaceLevelOutside);
            AddPointToSurfaceLine(surfaceLine, 2.0, 0.5, CharacteristicPointType.None);
            AddPointToSurfaceLine(surfaceLine, 4.0, 0.0, CharacteristicPointType.DikeToeAtRiver);
            AddPointToSurfaceLine(surfaceLine, 9.0, 5.0, CharacteristicPointType.DikeTopAtRiver);
            AddPointToSurfaceLine(surfaceLine, 10.0, 5.2, CharacteristicPointType.None);
            AddPointToSurfaceLine(surfaceLine, 13.0, 5.4, CharacteristicPointType.DikeTopAtPolder);
            AddPointToSurfaceLine(surfaceLine, 18.0, 1.0, CharacteristicPointType.DikeToeAtPolder);
            AddPointToSurfaceLine(surfaceLine, 24.0, 1.0, CharacteristicPointType.SurfaceLevelInside);
        }

        private static void FillLocations(Dike dike)
        {
            const int locationCount = 3;
            for (int i = 0; i < locationCount; i++)
            {
                var location = new Data.General.Location();
                location.ModelParametersForPLLines.PLLineCreationMethod = (PLLineCreationMethod) i;
                location.IntrusionVerticalWaterPressure = (IntrusionVerticalWaterPressureType) i;
                location.PolderLevel = 1.0 * i + 0.11;
                location.ModelParametersForPLLines.DampingFactorPL4 = 1.0 * i + 0.12;
                location.ModelParametersForPLLines.DampingFactorPL3 = 1.0 * i + 0.13;
                location.ModelParametersForPLLines.PenetrationLength = 1.0 * i + 0.14;
                location.PlLineOffsetBelowDikeCrestMiddle = 1.0 * i + 0.15;
                location.UsePlLineOffsetFactorBelowShoulderCrest = true;
                location.PlLineOffsetFactorBelowShoulderCrest = 1.0 * i + 0.16;
                location.PlLineOffsetDryBelowDikeCrestMiddle = 1.0 * i + 0.17;
                location.UsePlLineOffsetDryFactorBelowShoulderCrest = true;
                location.PlLineOffsetDryFactorBelowShoulderCrest = 1.0 * i + 0.18;
                location.SlopeDampingPiezometricHeightPolderSide = 1.0 * i + 0.19;
                location.PlLineOffsetBelowDikeTopAtRiver = 1.0 * i + 0.20;
                location.PlLineOffsetBelowDikeTopAtPolder = 1.0 * i + 0.21;
                location.PlLineOffsetBelowShoulderBaseInside = 1.0 * i + 0.22;
                location.PlLineOffsetBelowDikeToeAtPolder = 1.0 * i + 0.23;
                location.HeadPl2 = 1.0 * i + 0.24;
                location.HeadPl3 = 1.0 * i + 0.25;
                location.HeadPl4 = 1.0 * i + 0.21;
                location.SurfaceLine2 = dike.SurfaceLines2[i];
                for (int j = 0; j < 3; j++)
                {
                    var designScenario = FillDesignScenario(i * j);
                    location.Scenarios.Add(designScenario);
                }
                dike.Locations.Add(location);
            }
        }

        private static void FillSoilProfiles1D(Dike dike)
        {
            dike.SoilProfiles = new List<SoilProfile1D>();
            const int profilesCount = 2;
            for (int i = 0; i < profilesCount; i++)
            {
                var profile = new SoilProfile1D();
                profile.Name = "Profile1D " + (i + 1).ToString();
                profile.BottomLevel = -21.12 * (i + 1);
                const int layerCount = 3;
                for (int j = 0; j < layerCount; j++)
                {
                    var layer = new SoilLayer1D
                    {
                        Name = "Layer" + (j + 1).ToString(),
                        Soil = dike.SoilList.Soils[j],
                        TopLevel = 1 * -j
                    };
                    if (j < 2)
                    {
                        layer.WaterpressureInterpolationModel = WaterpressureInterpolationModel.Automatic;
                        layer.IsAquifer = false;
                    }
                    else
                    {
                        layer.WaterpressureInterpolationModel = WaterpressureInterpolationModel.Hydrostatic;
                        layer.IsAquifer = true;
                    }
                    profile.Layers.Add(layer);
                }
                dike.SoilProfiles.Add(profile);
            }
        }
        private static DesignScenario FillDesignScenario(int factor)
        {
            var designScenario = new DesignScenario();
            designScenario.RiverLevel = 1.0 * factor + 0.51;
            designScenario.RiverLevelLow = 1.0 * factor + 0.52;
            designScenario.DikeTableHeight = 1.0 * factor + 0.53;
            designScenario.PlLineOffsetBelowDikeTopAtRiver = 1.0 * factor + 0.54;
            designScenario.PlLineOffsetBelowDikeTopAtPolder = 1.0 * factor + 0.55;
            designScenario.PlLineOffsetBelowShoulderBaseInside = 1.0 * factor + 0.56;
            designScenario.PlLineOffsetBelowDikeToeAtPolder = 1.0 * factor + 0.57;
            designScenario.PlLineOffsetBelowDikeCrestMiddle = 1.0 * factor + 0.58;
            designScenario.UsePlLineOffsetBelowDikeCrestMiddle = true;
            designScenario.PlLineOffsetFactorBelowShoulderCrest = 1.0 * factor + 0.59;
            designScenario.UsePlLineOffsetFactorBelowShoulderCrest = true;
            designScenario.HeadPl3 = 1.0 * factor + 0.60;
            designScenario.HeadPl4 = 1.0 * factor + 0.61;
            designScenario.UpliftCriterionStability = 1.0 * factor + 0.62;
            designScenario.UpliftCriterionPiping = 1.0 * factor + 0.63;
            designScenario.RequiredSafetyFactorStabilityInnerSlope = 1.0 * factor + 0.64;
            designScenario.RequiredSafetyFactorStabilityOuterSlope = 1.0 * factor + 0.65;
            designScenario.RequiredSafetyFactorPiping = 1.0 * factor + 0.66;
            return designScenario;
        }

        private static void FillSoilProfiles2D(Dike dike)
        {
            dike.SoilProfiles2D = new List<SoilProfile2D>();
            const int profilesCount = 2;
            for (int i = 0; i < profilesCount; i++)
            {
                var profile = new SoilProfile2D
                {
                    Name = "Profile2D " + (i + 1).ToString()
                };

                const int preConCount = 2;
                for (int j = 0; j < preConCount; j++)
                {
                    var preCon = new PreConsolidationStress
                    {
                        Name = "Precon " + (j + 1).ToString(),
                        StressValue = 3.33 * (i + 1) * (j + 1),
                        X = 12.3 * (i + 1) * (j + 1),
                        Z = 0.3 * (-i - 1) * (j + 1)
                    };
                    profile.PreconsolidationStresses.Add(preCon);
                }
                const int layerCount = 3;
                for (int j = 0; j < layerCount; j++)
                {
                    var layer = new SoilLayer2D
                    {
                        Name = "Layer" + (j + 1).ToString(),
                        Soil = dike.SoilList.Soils[j]
                        
                    };
                    if (j < 2)
                    {
                        layer.WaterpressureInterpolationModel = WaterpressureInterpolationModel.Automatic;
                        layer.IsAquifer = false;
                    }
                    else
                    {
                        layer.WaterpressureInterpolationModel = WaterpressureInterpolationModel.Hydrostatic;
                        layer.IsAquifer = true;
                    }
                    layer.GeometrySurface = new GeometrySurface();
                    var outerLoop = new GeometryLoop();
                    outerLoop.Points.Add((new GeometryPoint(0, 0)));
                    outerLoop.Points.Add((new GeometryPoint(0, 10)));
                    outerLoop.Points.Add((new GeometryPoint(10, 10)));
                    layer.GeometrySurface.OuterLoop = outerLoop;
                    var innerloop = new GeometryLoop();
                    innerloop.Points.Add((new GeometryPoint(1, 1)));
                    innerloop.Points.Add((new GeometryPoint(1, 9)));
                    innerloop.Points.Add((new GeometryPoint(9, 9)));
                    layer.GeometrySurface.InnerLoops.Add(innerloop);
                    profile.Surfaces.Add(layer);
                }
                dike.SoilProfiles2D.Add(profile);
            }
        }

        private void CompareDamProjectData(DamProjectData actual, DamProjectData expected)
        {
            var compare = new CompareLogic { Config = { MaxDifferences = 100 } };
            var result = compare.Compare(expected, actual);
            Assert.AreEqual(0, result.Differences.Count, "Differences found read/write Input object");

        }
    }

}